Buderus Logano G215 WS, Инструкция по установке и обслуживанию

Страница: 19 / 62

Assembling the boiler block 7
Logano G215 WS - We reserve the right to make any changes due to technical modifications. 19
7.1.4 Inserting the packing cord
z
Unroll the required length of packing cord from the
roll supplied.
z
Peel the backing paper off the packing cord, as you
insert the cord into the packing groove.
z
Insert the flexible packing cord into the packing
groove, starting in the upper boiler hub area, and
lightly press in.
z
At the butt joints, overlap the packing cord by 2 cm
and press firmly together.
7.1.5 Knocking the central section into place
z
Turn the centre section around and locate with the
upper and lower boiler hubs on the nipples of the rear
section.
z
Drive the centre section onto the rear section using a
wooden or a rubber mallet.
Fig. 9 Inserting the packing cord
CAUTION!
SYSTEM DAMAGE
through leaking boiler sections.
z
Never stretch the packing cord during
application to ensure that the faces
between the boiler sections are sealed
correctly.
z
Carefully insert the packing cord into
the boiler section packing grooves.
Fig. 10 Knocking the central section into place
1 Wooden or rubber mallet
2 Rear section
1
2