Buderus Logano G215 WS, Инструкция по установке и обслуживанию

Страница: 32 / 62

Assembling the boiler block 7
Logano G215 WS - We reserve the right to make any changes due to technical modifications. 32
z
Push the side panel into the angled part of the lower
tie-bar.
z
Slightly lift the side panel.
z
Slot the side panel upper cutout into the upper tie-
bar.
z
Slot the rear part of the side panel onto the extended
hook.
z
Push against the lower end of the side panel and
secure to the rear panel using the snap nut.
Fig. 41 Push in the bottom front corner of the side panel
1 Angled part of the lower tie-bar
1
Fig. 42 Slot side panel into place
A
Upper tie-bar
B
Extended hook
A
B
Fig. 43 Fasten the side panel to the rear panel with screws
1 Snap nut
1