Buderus Logano G215 WS, Инструкция по установке и обслуживанию

Страница: 49 / 62

Heating system inspection and maintenance 11
Logano G215 WS - We reserve the right to make any changes due to technical modifications. 49
11.3 Cleaning the boiler
The boiler can be cleaned with brushes and/or by a wet
method. Cleaning equipment is available as an
accessory.
z
Open the burner door; for this purpose, remove the
two lateral hexagon bolts.
11.3.1 Cleaning the boiler with cleaning brushes
z
Note the position of the hot gas baffle plates to
enable their correct re-installation later.
z
Remove the hot gas baffle plates from the hot gas
flues.
z
Clean the hot gas baffle plates using one of the two
cleaning brushes.
z
Clean the hot gas flues by rotating the round cleaning
brush.
z
Clean the combustion chamber with a flat brush.
Remove all loose combustion residues from the
combustion chamber,
the hot gas flues and the flue
outlet.
z
Install the hot gas baffle plates in their original
position.
z
Check the packing cord on the burner door. Replace
damaged or hardened packing cord.
CAUTION!
RISK OF BURNING
through touching hot boiler parts.
z
Wear appropriate protective gloves or
use pliers.
Fig. 72 Opening the burner door
1
Combustion chamber
2
2rd hot gas flue
3
3rd hot gas flue
1
3
2
Fig. 73 Brushing out the hot gas flues
Fig. 74 Brushing out the combustion chamber