BTG Visual-ICE Скачать руководство пользователя страница 100

Страница: 100 / 126

7-18

User Manual

Message

Reason for Appearance

20-22 Maximum Activity for Active Thaw

•

Maximum limit for i-Thaw and FastThaw reached

•

Wait until thawing is complete before activating thaw

on additional needles

User attempted to activate more needles

than are supported for active thaw. After

completing the thaw phase, additional

needles may be activated.

20-23 Maximum Activity for Test

•

Maximum limit for test reached

•

Wait until testing is complete before activating

additional needles for testing

User attempted to initiate testing on

more needles than are supported for

simultaneous testing.

20-24 Advanced Thaw Unavailable

•

Needle(s) in channel X are not capable of advanced

thaw

•

Advanced thaw activity is unavailable

User attempted to initiate Advanced

Thaw in a channel. The channel did not

contain i-Thaw or FastThaw capable

needles.

20-25 Advanced Thaw Unavailable

•

Advanced thaw activity is unavailable on channel X

while helium is connected

•

Use helium thaw or disconnect helium

User attempted to initiate Advanced

Thaw while helium was connected. If

helium is connected, the system defaults

to helium thaw mode. If mixed needle

types are connected (some helium thaw

and some i-Thaw), the system also

defaults to helium thaw mode.

GAS

30-01 Gas Vent

•

Gas was not appropriately vented from the Visual-

ICE System when the system was last used

•

Vent the system, using either the automatic vent

option or the Manual Vent Valve

Upon startup, there was gas pressure

remaining in the system which will make

it difficult to connect needles.

Содержание Visual-ICE































































































































Результаты поиска

Содержание Visual-ICE

Отзывы:

Похожие инструкции для Visual-ICE

Бренды по названию

Популярные бренды

BTG Visual-ICE, Руководство пользователя

Результаты поиска

Содержание Visual-ICE

Отзывы:

Похожие инструкции для Visual-ICE

Бренды по названию

Популярные бренды