BTG Visual-ICE Скачать руководство пользователя страница 14

Страница: 14 / 126

1-2

User Manual

1.2 Intended Use

The Galil Medical Visual-ICE Cryoablation System is intended for cryoablative destruction of tissue

during minimally invasive procedures; various Galil Medical accessory products are required to

perform these procedures. The Visual-ICE System is indicated for use as a cryosurgical tool in the

fields of general surgery, dermatology, neurology (including cryoanalgesia), thoracic surgery (with

the exception of cardiac tissue), ENT, gynecology, oncology, proctology, and urology. This system is

designed to destroy tissue (including prostate and kidney tissue, liver metastases, tumors, and skin

lesions) by the application of extremely cold temperatures.

1.3 How Supplied

The Visual-ICE System is supplied non-sterile. Galil Medical accessory products required to perform

the cryoablation procedure are supplied separately.

1.3.1 Contents

•

Visual-ICE Cryoablation System

•

Visual-ICE Cryoablation System User Manual:

The User Manual describes the system and

provides instructions for system operation and maintenance.

•

Visual-ICE Cryoablation System Quick Reference Guide:

The Quick Reference Guide

summarizes key steps in system operation.

•

USB flash drive (4 GB)

within an attached pouch: The Galil Medical USB flash drive is used to

transfer procedure reports to a customer’s computer for saving or printing.

•

High-pressure argon gas supply line

with attached pressure gauge

o To accommodate procedure room variations, the gas supply line is available in alternative

lengths to connect the argon cylinder to the Visual-ICE Console. Reference Table 8-1.

•

High-pressure helium gas supply line

with attached pressure gauge

o To accommodate procedure room variations, the gas supply line is available in alternative

lengths to connect the helium cylinder to the Visual-ICE Console. Reference Table 8-1.

•

Optional EZ-Connect2 Dual Cylinder Adapter:

is an optional device used to connect two

gas cylinders in tandem to the Visual-ICE MRI System. The dual cylinder adapter consists of

a four-way adapter assembly with argon pressure gauge and long gas supply line with system

connection, short gas supply line with cylinder connection. Reference 4.5.3 for instructions on

using the EZ-Connect2 Adapter.

•

Console cover:

Protects the Console from dust, water, and debris during storage and

transportation

•

Ethernet cable (3 m):

The Ethernet cable is used to connect the Visual-ICE MRI Console to

a Galil Medical remote server for uploading reports and diagnostic data and for downloading

software updates.

Содержание Visual-ICE































































































































Результаты поиска

Содержание Visual-ICE

Отзывы:

Похожие инструкции для Visual-ICE

Бренды по названию

Популярные бренды

BTG Visual-ICE, Руководство пользователя

Результаты поиска

Содержание Visual-ICE

Отзывы:

Похожие инструкции для Visual-ICE

Бренды по названию

Популярные бренды