BTG Visual-ICE Скачать руководство пользователя страница 34

Страница: 34 / 126

3-4

User Manual

3.3.1 Navigation Tool Bar

Screen 3-4. Navigation Tool Bar

The

Navigation Tool Bar

contains the

Pressure Gauge / Gas Indicator

and procedure buttons that

you can select to enter registration information, configure procedure settings, enter procedure notes,

view and export reports, and end the procedure. On occasion, error messages may be displayed in

lieu of the logo.

Table 3-2. Navigation Tool Bar

Button

Description

Pressure Gauge / Gas

Indicator

Displays the working pressure of the argon and helium gases

within the system.

NOTE:

The Visual-ICE System contains internal regulators

that regulate the gas pressure to appropriate working limits.

The pressure displayed on the Gas Indicator is the internal,

regulated pressure and not the cylinder gas pressure.

Pressing the

Pressure Gauge

toggles the pressure gauge

to display the estimated procedure time remaining before

the gas cylinders are depleted. The estimated times are

displayed in hours:minutes:seconds. During needle testing,

both pressure gauges display the estimated time remaining.

The initial estimates during needle testing are based on

the assumption that all connected needles are operating

simultaneously at 100% freeze intensity.

The

Gas Indicator

updates in real-time as needles are

disconnected or additional needles are connected and as

the freeze intensity is adjusted. Pressing the Gas Indicator

toggles the display back to Pressure Gauge.

Registration

Provides optional data entry fields to record Patient ID,

Hospital Name, Hospital Address, Physician Name, and

Organ Type. Two custom fields are provided for additional

information. The names of the custom fields can be specified

in the

Configure Settings

screen (reference Section 5.1)

Notes

A location to input text. Selecting this button displays the

on-screen keyboard for data entry. Procedure notes entered

in this location are included in the procedure report (reference

Section 3.2).

Settings and

Procedure

Displays the

Procedure Screen

to begin a cryoablation

procedure.

Содержание Visual-ICE































































































































Результаты поиска

Содержание Visual-ICE

Отзывы:

Похожие инструкции для Visual-ICE

Бренды по названию

Популярные бренды

BTG Visual-ICE, Руководство пользователя

Результаты поиска

Содержание Visual-ICE

Отзывы:

Похожие инструкции для Visual-ICE

Бренды по названию

Популярные бренды