Bosch Rexroth SHA Series, Руководство по эксплуатации

Страница: 71 / 94

When? Where? What? Comments
After 3, 6 and 12
months
Complete system
Take oil samples
Read out acquired field data
Recommendation of Bosch Rexroth for better
field observation of the prototype.
Taking oil samples and reading out acquired
field data may exclusively be carried out by
Bosch Rexroth or by authorized and qualified
personnel of a specialized company that was
authorized by Bosch Rexroth.
Every 12 months
Position measuring
system
Check the function.
Guides
Check the condition and per‐
fect function.
They may only be replaced by Bosch Rexroth.
Every 40000
hours
Valve seals Change of all valve seals
Seals may be replaced exclusively by Bosch
Rexroth or by authorized and qualified person‐
nel of a specialized company that was author‐
ized by Bosch Rexroth.
Solenoid coils Replace all solenoid coils
Solenoid coils may be replaced exclusively by
Bosch Rexroth or by authorized and qualified
personnel of a specialized company that was
authorized by Bosch Rexroth.
Hydraulic fluid Change the hydraulic fluid
Hydraulic fluid may be changed exclusively by
Bosch Rexroth or by authorized and qualified
personnel of a specialized company that was
authorized by Bosch Rexroth.
The hydraulic fluid has to be replaced only as
required when oil analyses indicate excessive
aging.
Every 40000
hours or 10 mil‐
lion strokes or
when the filter
monitor re‐
sponds
Filter element Replace the filer element
The filter element may be replaced exclusively
by Bosch Rexroth or by authorized and qualified
personnel of a specialized company that was
authorized by Bosch Rexroth.
Every 40000
hours or 10 mil‐
lion strokes or
when required
(leakage)
Cylinder seals Replace the cylinder seals
The cylinder seal may be replaced exclusively
by Bosch Rexroth or by authorized and qualified
personnel of a specialized company that was
authorized by Bosch Rexroth.
After 10 million
load cycles
Safety valves Replace the safety valves
After 10 million load cycles the safety function of
the axis is no longer guaranteed, because the
service life of the safety valve has been excee‐
ded.
Safety valves may be replaced exclusively by
Bosch Rexroth or by authorized and qualified
personnel of a specialized company that was
authorized by Bosch Rexroth.
Tab. 10-1: Maintenance schedule
Maintenance indication by applica‐
tion software
The following parameters are continuously monitored by the application soft‐
ware PFC:
Operating Instructions Bosch Rexroth AG 69/91
Self-contained servo-hydraulic linear axis Type SHA...
Maintenance and repair