Bosch Rexroth SHA Series Скачать руководство пользователя страница 35

Страница: 35 / 94

7.4

Installation orientation

●

Information about the drive unit can be found in the installa‐

tion drawing.

●

Information about the installation orientation of the drive con‐

troller is contained in the project planning manual, see

chap‐

ter 1.2 "Required and supplementary documentation" on

page 5

7.5

Accessories

Regarding accessories, please contact Bosch Rexroth Service for

clarification; for the address see

chapter 16.1 "Service and sup‐

port" on page 87

7.6

Installing the self-contained servo-hydraulic linear axis

7.6.1

Preparing the installation

1. Check the scope of delivery for completeness and damage in transit.
2. Compare the material number with the details in the order confirmation.

If the material numbers or denominations of the self-contained

servo-hydraulic linear axis and of the drive controller do not corre‐

spond to those given in the order confirmation, contact Bosch

Rexroth Service for clarification; for the address, see

chapter

16.1 "Service and support" on page 87

7.6.2

Mechanical mounting

Improper mounting!
Insufficient fixation or insufficient stability may

cause the self-contained servo-hydraulic line‐

ar axis to become loose and fall down.
Consequently, hydraulic fluid may leak and

lead to personal injuries and/or damage to

property. Self-contained servo-hydraulic line‐

ar axes of heavy weight may bruise or strike

persons dead.

WARNING

●

Completely mount the self-contained servo-hydraulic linear axis accord‐

ing to the mounting specifications using suitable mounting aids.

Accidental movement of the self-contained

servo-hydraulic linear axis while it is being in‐

stalled!
Risk of injury! Danger of crushing! Damage to

property!

WARNING

●

Keep the self-contained servo-hydraulic linear axis in a stable and se‐

cured position until it is firmly mounted to the mounting face provided at

the customer’s end.

●

Be careful when installing the unit.

Operating Instructions

Bosch Rexroth AG

33/91

Self-contained servo-hydraulic linear axis Type SHA...

Installation

Содержание Rexroth SHA Series































































































Результаты поиска

Содержание Rexroth SHA Series

Отзывы:

Похожие инструкции для Rexroth SHA Series

Бренды по названию

Популярные бренды

Bosch Rexroth SHA Series, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth SHA Series

Отзывы:

Похожие инструкции для Rexroth SHA Series

Бренды по названию

Популярные бренды