Bosch Rexroth SHA Series, Руководство по эксплуатации

Страница: 27 / 94

5.3 Identification of the product
5.3.1 Description of the nameplate for the complete system
Fig. 5-4: Nameplate of complete system
1 Word mark Rexroth
2 Material number
3 Serial number
4 Date of manufacture (year and week)
5 Type designation
6 Customer's or production job order number
7 Designation of origin
8 Sample status
9 Manufacturer's factory number
5.3.2 Description of nameplates of main components
The description of nameplates of the main components such as
●
motor/pump group
● drive controller, etc.
can be found in the relevant instructions, see also chapter 1.2
"Required and supplementary documentation" on page 5 .
For queries with regard to the self-contained servo-hydraulic line‐
ar axis and its main components you have to indicate the material
numbers and the fabrication numbers. You should preferably take
photographs of the nameplates and send them to Bosch Rexroth.
5.4 Technical interfaces
5.4.1 Mechanical interfaces
The mechanical interfaces of the self-contained servo-hydraulic linear axis
are the coupling of the cylinder piston to the machining tool as well the cou‐
pling to the mounting face of the complete production machine; see also
chapter 7.6.2 "Mechanical mounting" on page 33 and the installation draw‐
ing.
Operating Instructions Bosch Rexroth AG 25/91
Self-contained servo-hydraulic linear axis Type SHA...
About this product