Bosch Rexroth SHA Series Скачать руководство пользователя страница 13

Страница: 13 / 94

2.5

General safety instructions

●

Observe the valid regulations on accident prevention and environmental

protection.

●

Observe the safety regulations and provisions of the country in which

the product is used/applied.

●

Exclusively use Rexroth products in technically perfect condition.

●

Observe all notices on the product.

●

Persons who install, commission, operate, demount or maintain Rexroth

products must not consume any alcohol, drugs or pharmaceuticals that

may affect their ability to respond.

●

Only use original Bosch Rexroth accessories and spare parts in order to

prevent any hazard to persons due to unsuitable spare parts.

●

Comply with the technical data and ambient conditions specified in the

product documentation.

●

The installation or use of inappropriate products in safety-relevant appli‐

cations could result in unintended operating states in the application

which in turn could cause personal injuries and/or damage to property.

Therefore, only use a product for safety-relevant applications if this use

is expressly specified and permitted in the documentation of the prod‐

uct, e.g. in explosion protection zones or in safety-related parts of con‐

trol systems (functional safety).

●

Do not commission the product until you can be sure that the end prod‐

uct (for example a machine or system) in which the Bosch Rexroth prod‐

ucts are installed complies with the country-specific provisions, safety

regulations and standards of the application.

2.6

Product-specific safety instructions

The following safety instructions apply to chapters 6 to 14.

Risk of damage to property and personal inju‐

ries!
Any modifications to or work on the self-con‐

tained servo-hydraulic axis, e.g. changing of

pipework, opening of fittings (except for the

fittings provided at the self-contained servo-

hydraulic linear axis for measuring purposes),

which are not described in these operating in‐

structions or were not agreed with Bosch

Rexroth, can lead to personal injury and dam‐

age to property!

WARNING

●

You may only carry out work on the self-contained servo-hydraulic linear

axis that is described in these operating instructions.

●

Any modifications may exclusively be carried out by Bosch Rexroth or

by authorized and trained personnel of a specialized company that was

authorized by Bosch Rexroth.

●

The mounting and installation instructions have to be strictly observed.

Operating Instructions

Bosch Rexroth AG

11/91

Self-contained servo-hydraulic linear axis Type SHA...

Safety instructions

Содержание Rexroth SHA Series































































































Результаты поиска

Содержание Rexroth SHA Series

Отзывы:

Похожие инструкции для Rexroth SHA Series

Бренды по названию

Популярные бренды

Bosch Rexroth SHA Series, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth SHA Series

Отзывы:

Похожие инструкции для Rexroth SHA Series

Бренды по названию

Популярные бренды