BOC Edwards iL600, Инструкция по эксплуатации

Страница: 28 / 146

Use the menu (7), up (5), down (3), CANCEL (4) and ENTER (6) buttons as described below.
Refer to Section 4 for a full definition of the menu structures and the display formats.
Button LED colour Button use
Normal Green Press this button to select the Normal display (see above).
Control Green Press this button to select the Control menu. You can then take
control or release control of the iL system (see Section 5.3).
Status Green Press this button to select the Status menu. In this menu, you can
display the current values of all iL system sensors.
Setup Green Press this button to select the Setup menu. In this menu you can:
manually control the operation of iL gas purges and gate valves fitted
to the vacuum system (and connected to the iL through an iL Interface
Module with an Auxiliary Interface Card); select 'Run til Crash';
change other display parameters (such as the pressure units used
when pressures are displayed and the timeout time). The Setup
menu also allows you to select the Service menu; in this menu, you
can zero the Gas Module flow transducer and manually operate the
components of the iL system.
ENTER - Use this button to select a currently displayed menu option or to enter
a currently displayed parameter.
CANCEL - Use this button to cancel the currently displayed menu or option and
return to the previous menu or option.
Up/down - Use these buttons to move up or down menu options or to increase or
decrease a displayed parameter.
The status LEDs (9) show the current status of the iL system and the Pump Display Module:
LED LED colour Meaning
ALARM Red This LED shows when an alarm condition exists.
WARNING Amber This LED shows when a warning condition exists.
LOCAL
CONTROL Green This LED is on when the Pump Display Module has control of the iL
system.
iL Dry Pumping Systems 1-19