BOC Edwards iL600, Инструкция по эксплуатации

Страница: 132 / 146

Alarm message Advisory message Meaning/recommended action
ALARM 1012 Refer to the recommended actions for error
number 1011: see Table 6-1.
ALARM 1101
(a) the electrical supply is not connected to the
LCDP pump-motor, or (b) the LCDP pump has
started, but has then immediately stopped
again, because the phase sequence of the
electrical supply to the pump is incorrect:
reverse two of the phases in the electrical
supply connector: refer to Section 3.15.3).
ALARM 1201 When started, no electrical current was drawn
by the LCMB pump. Check whether the pump
motor is open circuit. If not, the current sensor
may have failed.
ALARM 5412
MB TEMP
MB TEMP HIGH
SEE MANUAL Refer to the recommended actions for error
number 5411: see Table 6-1.
ALARM 5512
DP MOTOR TEMP
MOTOR WATER LOW
CHECK WATER Refer to the recommended actions for error
number 5511: see Table 6-1.
ALARM 5710
DP TEMP LOW
DP TEMP LOW
SEE MANUAL Refer to the recommended actions for error
number 5709: see Table 6-1.
ALARM 5712
DP TEMP HIGH
DP TEMP HIGH
SEE MANUAL
Refer to the recommended actions for error
number 5711: see Table 6-1.
Table 6-2 - Alarm messages (continued)
iL Dry Pumping Systems 6-21