Biotek Synergy HT, Руководство оператора

Страница: 39 / 240

7: Unpack and Inspect the Dispense Module
|
17
Synergy HT Operator's Manual
7: Unpack and Inspect the Dispense Module
This section applies to Synergy™ HT models with injectors only.
L
Important! Save all packaging materials. If you need to ship
the dispense module to BioTek for repair or replacement, you
must use the original materials. Using other forms of
commercially available packaging, or failing to follow the
repackaging instructions, may
void your warranty .
During the unpacking process, inspect the packaging, module,
and accessories for shipping damage. If the reader is damaged,
notify the carrier and your BioTek representative. Keep the
shipping boxes and the packaging materials for the carrier’s
inspection. BioTek will arrange for repair or replacement of
your reader immediately, before the shipping-related claim is
settled.
Perform these steps to unpack and inspect the dispense module and accessories:
1. Open the outer shipping box. Remove the foam cap, inner shipping box, and
accessories box.
Figure 7: Unpacking the dispense module’s outer shipping box
Outer
shipping box
Accessories
box
Bottom foam
end cap
Top foam end
cap
Inner shipping box
(Dispense module)