Bilanciai Cigiemme MERCURY PLUS, Инструкция по эксплуатации

Страница: 239 / 260

MERCURY PLUS
1-239
the board
connection
responded to a
command.
remote control
board (serial cable)
and make sure that
it is being correctly
powered in the
panel.
1114-1202 Serious errors
inside the software.
Contact the
software office.
2001 Weighing target too
far in advance
This problem is
due to the incorrect
position of the
static weighing
target. Typically, a
static weighing
target that is too far
in advance makes
the piece to be
weighed stop after
having passed
beyond the end of
the belt as well.
Alternatively, if the
target is too far
back, the piece to
be weighed stops
too soon and the
previous piece will
have not yet left
the scale.
Proceed in the
following way to
modify the
"weighing target"
value:
1- access the
process again
2- press "MODIFY
DATA"
immediately,
before a package
has time to transit
3- modify the
"WEIGHING POS."
value
4- save the
changes and
access the
processing phase
again
This changes the
value of that plu.
If the problem still
persists even with
the minimum (or
maximum) value,
check the same
value entered in
the general
settings of the
machine.
2002 Label delayed The piece has
reached the
application target
Possible causes:
- belt targets too far
in advance