Bilanciai Cigiemme MERCURY PLUS Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 260

Bilanciai Cigiemme MERCURY PLUS Скачать руководство пользователя страница 35

MERCURY PLUS

1-35

ATTENTION

(VERSION WITH THREE BELTS)

In this case, incorrect feeding could result in several products
being loaded into the weighing system at the same time, thus
generating a weighing error which, once detected by the
system, would halt the process and thus slow the production
rate.

1.9.8 Separator conveyor

The purpose of the stage immediately prior to the weighing one is to
stop the product conveyed if the scale or belt prior to the labelling
machine is occupied.

1.9.9 Weighing conveyor

The product transits in order to be weighed during this stage. Weighing
may take place without stopping the product in the scale (dynamic
weighing mode) or by stopping the belt (static weighing mode).

1.9.10 Labelling conveyor

This is the stage that allows the product to be positioned under the
printing/application system, thus enabling the label to be applied.
The labelling operation may take place without stopping the product on
the belt (dynamic application mode) or by stopping the belt (static
application mode).

«
...
33
34
35
36
37
...
»

Содержание Cigiemme MERCURY PLUS





































































































































































































































































Отзывы:

Нет отзывов