Bilanciai Cigiemme MERCURY PLUS, Инструкция по эксплуатации, Страница: 169 / 260

MERCURY PLUS
1-169
5.19.2 Properties of the weight monitoring archive
The "weight monitoring" mode can be enabled or disabled for each plu.
This is done by enabling the CTRL ENABLING field in the WEIGHTS
group. This operating mode only functions if the plu processed is the
fixed weight type. The normal process will be activated if this is not the
case. If the "remote management" or "crate weighing" functions are
selected, the weight control mode is
disabled regardless of the settings
in the fields of the PLU being processed.
There are four fields in the WEIGHTS group of the plu (-- LIMIT, - LIMIT,
+ LIMIT, ++ LIMIT), which identify the 5 weight summarizing zones.
These limits are loaded in the automatic mode when fixed weight
operation is selected and can only be modified via the user interface
(only + LIMIT and ++ LIMIT) before the first piece passes.
Each line in the table identifies a weight range (WEIGHT_FROM must
be less than WEIGHT_TO) given in grams, for which the + and - limits
are calculated beginning from the nominal weight and applying (either
more or less) the error percentage (ERR_%) or the absolute weight
(WEIGHT_ERR), depending on whether there is a positive value for one
field or the other.
WEIGHT_FROM WEIGHT_TO ERR_% WEIGHT_ERR
5 49 9
50 99 4.5
100 199 4.5
200 299 9
300 499 3
500 999 15
1000 9999 1.5
10000 14999 150
15000 9999999 1
Table 5.27 - Reference table for weight control