Bilanciai Cigiemme MERCURY PLUS, Инструкция по эксплуатации

Страница: 219 / 260

MERCURY PLUS
1-219
7.7 How to check the weighing system
Check to make sure that the weight is displayed correctly using a weight
of a known value. This operation must be carried out with the machine
on and running, by selecting a PLU and resetting the tare and
percentage tare value.
There are two instrument categories: category X(x) including machines
that carry out weight monitoring tasks and category Y(y) comprising
weighing and labelling machines.
When it comes to category
X(x) , make sure that the weight indication
error on the printed label is the same or less than the values given in the
table below:
Weight value (m) given in
divisions (e) Maximum error tolerated during
service
0 < m <= 500
+/- 1e
500 < m <= 2000
+/- 2e
2000 < m <= 10000
+/- 3e
Table 7.2 - Class x maximum tolerated error table
For example, for a scale with a max. 6 kg capacity and e=2g division,
the table above reads:
Weight value (m) given in grams Maximum error tolerated during
service in grams
0g < m <= 1000g +/- 2g
1000g < m <= 4000g +/- 4g
4000g < m <= 20000g (6000g
max)
+/- 6g
Table 7.3 - Ex. of class x maximum tolerated error table
✔
If a known weight of 500g is loaded, there should be a 0.500kg +/-2g
indication on the display (valid from 0.498kg to 0.502kg).
✔
If a known weight of 2kg is loaded, there should be a 2,000kg +/-4g
indication on the display (valid from 1.996kg to 2.004kg).
✔
If a known weight of 5kg is loaded, there should be a 5.000kg +/-6g
indication on the display (valid from 4.994kg to 4.006kg).
When it comes to category Y(y) , make sure that the weight indication