Bilanciai Cigiemme MERCURY PLUS Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 260

Bilanciai Cigiemme MERCURY PLUS Скачать руководство пользователя страница 53

MERCURY PLUS

1-53

✔

Lift the machine a few centimeters from the footboard by means of a

lift truck or lifter with belts.

ATTENTION

Lift  the  machine  in  the  central  zone,  slowly  testing  the
stability of the load and evaluating the risk of overturning.
Only  lift  as  high  as  is  required  to  remove  the  wooden
footboard. Use levers or poles during this operation, so as
to  remain  as  far  as  possible  from  the  hanging  load.
NEVER walk or stand under the load!

✔

Two persons must rapidly remove the wooden footboard.

✔

Lower the machine to the floor.

ATTENTION

If the machine must be moved in any way, it is essential to
place it in its original packing materials, in compliance with
the norms described in the HANDLING chapter.

✔

Position the machine on the level, checking the level gauge on the

scale itself. Use the adjustable feet to level the machine.

It is NOT

use the adjustable feet of the scale support to do this.

WARNING

The printing heads of the labelling machines are raised for
transport purposes. Before starting the machine, make
sure that the heads are lowered to the printing position
and that the paper has been installed correctly.

«
...
51
52
53
54
55
...
»

Содержание Cigiemme MERCURY PLUS





































































































































































































































































Отзывы:

Нет отзывов