9
WARNING
• Follow the equipment maintenance
and repair requirements for routine
and regular inspection and maintenance
of the product and equipment, and
maintain maintenance records.
DURING REPAIR
DANGER
• Follow Lock Out/Tag Out procedures.
• Non-professionals are strictly
prohibited from equipment installation,
wiring, maintenance, inspection or
component replacement.
• It is prohibited to repair the equipment
when power is on; otherwise, there is
danger of electric shock.
• After the equipment power is cut off,
wait for at least 10 minutes before
inspecting or repairing the equipment
or performing other operations.
CAUTION
• Repair the equipment according to
the product warranty agreement.
• When the equipment has a fault or is
damaged, troubleshoot and repair the
equipment and product follow guidance
by professionals, and maintain repair
records.
• Replace the product’s wearing
components under the guidance of
professionals.
• Do not continue to use damaged
machines; otherwise, greater damage
may occur.
• After replacing the equipment,
recheck the equipment wiring
and parameter settings again.
DURING SCRAPPING
CAUTION
• Scrap the equipment and product
according to government regulations
and standards to avoid property loss
or personal injury.
• Recycle scrapped equipment and
product according to industrial waste
processing standards to avoid pollution
to the environment.
SAFETY MARKS
For safe operation and maintenance of the
equipment, be sure to observe the safety
marks affixed to the equipment and product.
Do not damage, destroy or peel off the safety
marks. Safety marks are described as follows:
• Read the user manual before installing
and running the equipment; otherwise,
there is danger of electric shock.
• Do not dismantle the cover within 10
minutes after the power is turned off.
• After cutting off the power at the
input and output terminals, wait for 10
minutes until the power indicator turns
off before maintaining, inspecting or
wiring the equipment.
