33
4
Install the bottom mounting bracket
If your cabinet comes with mounting holes
around the base, as illustrated in the figure
below, use six M5 tapping screws to attach
the mounting bracket to the cabinet base
according to the following figure (the mounting
bracket drawing is shown below and on the
following page).
If your cabinet is not already equipped with
mounting holes around the base, drill mounting
holes for the bracket on site for the six M5
tapping screws.
Figure 4-1-4c Installing the bottom mounting bracket
4.1.5 Dimensions of Bottom Mounting Bracket
Dimensions of mounting bracket for RSI-PPVC-0250-4-3-X-IP00-IM to
RSI-PPVC-0300-4-3-X-IP00-IM
Figure 4-1-5a Dimensions of mounting bracket
for
RSI-PPVC-0250-4-3-X-IP00-IM to
RSI-PPVC-0300-4-3-X-IP00-IM (factory standard)
M5 self-tapping screw
Quantity: 6 Pcs.
Bottom mounting bracket
(standard configuration)
Nine-folding
AL cabinet
35.5
35.5
R5
38
38
27
10.5
10.5
Note: This DIN rail figure is applicable to a cabinet of 800mm wide x 600mm deep
or 800mm wide x 800mm deep.
Detail A
30º
32.5
2-FH6
M15
65
65
39.5
65
17.5
140
305
View detail A
181
62
9
580 (780)
40
9
144
80.5
42.5
22.5
2.5
66.5
41.5
75
100
104
100
2 -
Ø
10
525 (725)
27.5
125
100
6 -
Ø
6
When choosing a cabinet, be sure to select a heavy-duty enclosure
that is adequately designed to handle the weight and size (including
ventilation space requirements) of the drive you’re installing in it.
