BENSHAW PowerPro RSI-PPVC-0001-4-3-B-IP20-IM, Руководство пользователя

Страница: 53 / 156

53
6
6.1.5 Keys on LED Operating Panel
The following example shows how to modify F3-02 from 10.00 Hz to 15.00 Hz.
Figure 6-1-5 How to modify the parameter value
(a) Press or from a Level III menu
to return to a Level II menu. The difference
between the two keys is:
is used to save the parameter value you
have set, return to Level II menu and then
select the next function parameter.
is used to return to Level II menu without
saving the parameter value and remain at the
current function code.
(b) When operating in Level III menus, if
the parameter does not include a flashing
digit, then it is not possible to modify that
parameter. There are two possible reasons
for this:
(1) The function parameter you have selected
is read-only. Examples of read only parameters
are: Output Frequency, output Current, etc...
(2) The displayed function parameter cannot
be modified while the AC drive is in the
RUNNING status. You can modify these types
of parameter only when the AC drive is in the
STOP status.
PRG
ENTER
ENTER ENTER
RUN LOCAL
/
REMOT FED
/
REV TUNE
/
TC
RPM %
A V Hz
RUN LOCAL / REMOT FED / REV TUNE / TC
RPM %
A V Hz
RUN LOCAL / REMOT FED / REV TUNE / TC
RPM %
A V Hz
RUN LOCAL / REMOT FED / REV TUNE / TC
RPM %
A V Hz
RUN LOCAL / REMOT FED / REV TUNE / TC
RPM %
A V Hz
RUN LOCAL / REMOT FED / REV TUNE / TC
RPM %
A V Hz
RUN LOCAL / REMOT FED / REV TUNE / TC
RPM %
A V Hz
RUN LOCAL / REMOT FED / REV TUNE / TC
RPM %
A V Hz
(Return)