BENSHAW PowerPro RSI-PPVC-0001-4-3-B-IP20-IM, Руководство пользователя

Страница: 143 / 156

143
Table B-5-5a Terminal descriptions of RSI-PPVC-AXRY-ENPG-PG6 and RSI-PPVC-AXRY-ENPG-PG7
B.5.5 Extension Open-Collector PG Card (RSI-PPVC-AXRY-ENPG-PG6 and RSI-PPVC-AXRY-ENPG-PG7)
Terminal Function Description Terminal Arrangement
CN2 A Encoder output signal A
J3
A B Z 15V CCM COM B1 PE A1
B Encoder output signal B
Z Encoder output signal Z
15V Encoder 15V/100mA power supply
COM Power ground and frequency dividing output ground
COM Power ground and frequency dividing output ground
A1 PG card frequency dividing output signal A (OC
output, 0 to 24 V, 0 to 50 mA)
B1 PG card frequency dividing output signal B (OC
output, 0 to 24 V, 0 to 50 mA)
PE Shield connecting point
CN3, CN4 “pulse +
direction”
function Supporting the “pulse + direction” function
Pulse signal connected to phase A, direction
signal connected to phase B
CN3 CN4
Not supporting the “pulse + direction” function
(default setting)
CN3 CN4
CN1 18-pin FFC interface, connecting to J4 on the control board of the AC drive
Table B-5-5b Descriptions of DIP Switch of RSI-PPVC-AXRY-ENPG-PG7
Figure B-5-5 Port circuit of RSI-PPVC-AXRY-ENPG-PG6 and RSI-PPVC-AXRY-ENPG-PG7
Address Setting
Frequency Dividing Coefficient DIP Switch 1 2 3 4 5 Value
0 0 0 0 0 0 No output
ON
1 2 3 4 5
Frequency dividing
coefficient setting
S1
0 0 0 0 1 1 No output
0 0 0 1 0 2 Frequency divided by 4
0 0 0 1 1 3 Frequency divided by 6
1 1 1 1 1 31 Frequency divided by 62
COM
15V
A,B,Z
0V
VCC
A,B,Z
PE
Shield
A1,B1
COM
Frequency
dividing output
PG card
Encoder