benshaw.com
8
SAFETY INFORMATION
DURING WIRING (CONTINUED)
CAUTION
• Follow the electro-static discharge (ESD)
precautions and wear an ESD wrist strap
to avoid damage to the equipment or
circuit inside the product.
• It is prohibited to connect the input
power to the output terminal of the
equipment or product; otherwise, the
equipment may be damaged or fire may
occur.
• When connecting the drive to the motor,
be sure that the phase sequence of
the drive and the motor terminal are
consistent, so as to avoid reverse rotation
of the motor.
• The cables used for wiring must
meet relevant diameter and shielding
requirements, and the shielding layer
of the shielding cables must be reliably
grounded at a single terminal.
• After wiring is complete, be sure there
are no screws or bar cables left inside the
equipment and product.
DURING POWER-ON
DANGER
• Before power-on, make sure the equipment
and product are installed properly, the
wiring is securely connected and the motor
unit is allowed to restart.
• Before power-on, make sure the power
supply meets the equipment requirements
to avoid damage to the equipment or fire.
• During power-on, mechanical devices of
the equipment or product may suddenly
move. Stay away from the mechanical
devices.
• After power-on, do not open the
equipment cabinet door or product
protection cover; to avoid the danger
of electric shock.
• It is prohibited to touch any terminal of the
equipment when power is on; otherwise,
there is danger of electric shock.
• It is prohibited to dismantle any device
or parts of the equipment and product
when the power is on; otherwise, there is
danger of electric shock.
DURING RUNNING
DANGER
• It is prohibited to touch any terminal
of the equipment when it is running;
otherwise, there is danger of electric
shock.
• It is prohibited to dismantle any device
or parts of the equipment and product
when the equipment is running;
otherwise, there is danger of electric
shock.
• It is prohibited to touch the equipment
closure, fan or resistor to check the
temperature; otherwise, there is
danger of burns.
• Non-professional technicians are
prohibited from monitoring signals
when the equipment is running;
otherwise, there is danger of personal
injury or damage to the equipment.
WARNING
• When the equipment is running,
do not drop other articles or metals
into the equipment; otherwise, the
equipment may be damaged.
• Do not start or stop the equipment
by turning on or off the connector;
otherwise, the equipment may be
damaged.
DURING MAINTENANCE
DANGER
• Non-professionals are strictly
prohibited from equipment
installation, wiring, maintenance,
inspection or component replacement.
• It is prohibited to maintain the
equipment when power is on;
otherwise, there is danger of electric
shock.
• After the equipment power is cut
off, wait for at least 10 minutes
before maintaining the equipment or
performing other operations.
