BeneVision TM80, Руководство оператора

Страница: 42 / 240

3 - 12 BeneVision TM80 Telemetry Monitor Operator’s Manual
For details about configuring the time for Display Auto Off , refer to 12.3 Configuring the
General Menu .
NOTE
•
While the display is off, the telemetry monitor enters the power saving mode,
and does not provide audio and visual alarms.
•
If the telemetry monitor is not connected to the CMS or lethal arrhythmia alarm
occurs, the telemetry monitor’s display is automatically turned on and it will
not timeout. You cannot manually turn the display off. For details, refer to
12.11 Auto Enter Monitor Mode .
3.7.7 Turning the Display On
If the screen is off, press the or key to turn the display on.
CAUTION
•
Do not let the display directly touch the patient when the display is on.
3.7.8 Unlocking the Screen in Locked Mode
If you set the screen lock, you need to input the correct passcode to unlock the screen after
the display turns off.
1. If the screen is off, press the or key to turn the display on and access the
Screen Locked menu.
2. Input the passcode to unlock the screen.
Once the passcode is entered the screen is temporarily unlocked. If the is
pressed or the device times out, the screen will lock again and a passcode must be
entered.
3.7.9 Unlocking the Screen in View Only Mode
1. If the screen is off, press the or key to turn the display on.
2. Press the key to display the Screen Locked menu.
3. Input the passcode to unlock the screen.
Once the passcode is entered the screen is temporarily unlocked. If the is
pressed or the device times out, the screen will lock again and a passcode must be
entered.
For details about setting the screen lock, refer to 12.8 Screen Lock Menu .