BeneVision TM80, Руководство оператора

Страница: 137 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 12 - 1
12
Configuring the Telemetry Monitor
12.1 Introduction
The Maintenance menu provides access to the system settings such as location, device
name, alarm settings, quick keys, screen lock, and password updates. Entering this menu
requires a passcode.
12.2 Entering the Maintenance menu
1. In the main menu, tap Maintenance .
2. Input the maintenance passcode.
3. Tap Accept to enter the Maintenance menu.
12.3 Configuring the General Menu
1. In the Maintenance menu, tap General .
The current setting displays to the right of the option.
2. Select the options described in the following table.
Options Description Settings*
Display Auto Off Configures the time for display auto
off. 1 min , 2 min, 5 min, 15 min
30 min, Off
Language Configures the system language. ENGLISH , FRENCH
Device Location Changes the hospital ,department
name, room number, and bed
number.
Refer to 12.3.1 Configuring Device
Location for details.
N/A
Notch Filter Configures the ECG Notch filter.
This option is used to filter out AC
line noise from the ECG waveform. 50 Hz, 60 Hz , Off
The default is 50 Hz when
the monitor is not
configured for the US.
ECG Lead Labeling Changes the ECG lead labeling. AHA , IEC
Calibrate ECG Enables or disables the ECG
verification. On, Off
Refer to 17.6 Verifying the
ECG for details.
* The factory default settings are in bold.