BeneVision TM80, Руководство оператора, Страница: 138 / 240

12 - 2 BeneVision TM80 Telemetry Monitor Operator’s Manual
3. Tap the icon to exit the General menu.
NOTE
•
Mindray recommends the same SpO
2
tone mode be used for the device within a
monitoring area.
12.3.1 Configuring Device Location
You can change device location and set whether to allow modifying a department name,
room number, and bed number in the
Patient Info menu.
To configure device location:
1. In the Maintenance menu, tap General .
2. Tap Device Location .
3. Tap Facility .
4. Enter the desired name.
5. Tap Department .
6. Select the desired option.
◆
Fixed : you cannot modify Department in the Patient Info menu.
Department is the one entered in the Department field of the Device
Location menu.
◆
Unfixed : you can modify Department in the Patient Info menu.
7. Tap Bed No./Room No .
8. Select the desired option.
SpO
2
Module Changes the SpO
2
module. Masimo SpO
2
, Nellcor SpO
2
SpO
2
Tone Configures the SpO
2
tone. Mode 1 , Mode 2
Date &Time Configures the time format, date
format, specific time, and date. Time Format: 12Hr, 24 Hr
Date Format: DD/MM/YY,
YY/MM/DD , MM/DD/YY
Resp This option is available only when
the Resp functionality is supported.
When it is supported and Resp is
enabled, Resp numeric and
waveform are displayed on the
screen.
On, Off
Options Description Settings*
* The factory default settings are in bold.