BeneVision TM80, Руководство оператора

Страница: 93 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 7 - 27
■
When the 5-lead ECG leadwires are used, seven ST values (ST-I, ST-II, ST-III, ST-aVR, ST-
aVL, ST-aVF, ST-V) are displayed in the ST digital area.
■
When the 6-lead ECG leadwires are used, eight ST values (ST-I, ST-II, ST-III, ST-aVR, ST-
aVL, ST-aVF, ST-V
a, ST-Vb ) are displayed in the ST digital area.
This example shows the ST digital area when the 6-lead ECG leadwires are used. Your
screen may look slightly different:
1. Parameter label
2. ST alarm off symbol
3. Lead label
4. ST unit
5. ST numerics: a positive value indicates ST segment elevation, and a negative value
indicates ST segment depression.
7.8.4 Configuring ST Alarm Settings
To configure ST alarm settings, follow this procedure:
1. Tap the ST digital area to enter the ST menu.
2. Tap ST Alarm Setup .
3. In the Setup section, tap ST Alarm Mode and then select the desired mode:
◆
Absolute : you can separately set the alarm properties for each ST alarm. After
selecting this option, the Auto Limits option is displayed where you can initiate
auto adjustment of alarm limits.
◆
Relative : it is the default option. You can set the alarm properties for ST Single
and ST Dual alarms.
4. In the Alarms section, select the options described in the following table.
1
3
4
)
2
5