BeneVision TM80, Руководство оператора

Страница: 114 / 240

9 - 10 BeneVision TM80 Telemetry Monitor Operator’s Manual
2. Tap the icon to exit the SpO
2
menu.
9.6 SpO
2
Measurement
9.6.1 Identifying SpO
2
Modules
To identify which SpO
2
module you are using, see the company logo on the SpO
2
module.
■ Masimo SpO
2
module is with a logo of Masimo SET.
■
Nellcor SpO
2
module is with a logo of Nellcor.
Options Description Settings*
SpO
2
Alarm Setup Configures whether to switch on SpO
2
and
SpO
2
Desat alarms. SpO
2
and Desat default
to be switched on.
After tapping SpO
2
or Desat you can
configure alarm limits and alarm priority.
For SpO
2
:
Alarm switch: On , Off
Alarm limit range:
0% to 100%;
The default alarm upper
limit is
100 %. The default
alarm low limit is 90%.
Alarm Priority: Med , High
For Desat:
Alarm switch: On , Off
Alarm limit range:
Lower alarm limit is not
higher than the SpO
2
lower
alarm limit. The default
alarm low limit is
80%.
Alarm Priority: High
NIBP Simul When monitoring SpO
2
and NIBP on the same
limb simultaneously, you can switch on NIBP
Simul to lock the
SpO
2
alarm status until the
NIBP measurement ends. If you switch off
NIBP Simul , low perfusion caused by NIBP
measurement may lead to inaccurate SpO
2
readings and therefore cause false
physiological alarms.
On, Off
* The factory default settings are in bold.