BeneVision TM80, Руководство оператора

Страница: 100 / 240

8 - 2 BeneVision TM80 Telemetry Monitor Operator’s Manual
8.3 Preparation for Monitoring Resp
8.3.1 Preparing the Patient’s Skin
To prepare the patient’s skin, follow this procedure:
1. Shave the chest hair from the electrode sites in a circular area with a diameter of 2 to
4 inches.
2. Use a dry gauze pad to remove excess skin oils, skin cells and residue from the elec-
trode sites. Never rub the skin until it is raw or bleeding.
NOTE
•
Proper skin preparation is necessary for good signal quality at the electrode
site, as the skin is a poor conductor of electricity.
8.3.2 Positioning the Electrodes
As the Respiration measurement adopts the standard ECG electrode placement, you can
use different ECG cables. Since the respiration signal is measured between two ECG
electrodes, if a standard ECG electrode placement is applied, the two electrodes should be
RA and LL of ECG Lead II.
For more information, refer to 7.3.4.1 Standard 3-Leadwire Electrode Placement ..
Lead II
RA (R)
LL (F
)