BeneVision TM80, Руководство оператора

Страница: 153 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 12 - 17
•
If you already choose monitor mode via the telemetry monitor or CMS, the auto
enter monitor mode would be ineffective.
•
If the telemetry monitor is paired with a N series monitor and the N series
monitor is in standby, the telemetry in monitor mode, then the auto enter
monitor mode would be ineffective.
•
For details about configuring the Display Auto Off time, refer to 3.7.6 Turning
the Display Off .
WARNING
•
When No Central Monitoring is disabled, the medical staff should pay more
attention to the patient’s status and check the telemetry monitor’s network
connection status at the CMS. When the offline alarm is displayed on the CMS,
medical staff should check the patient ‘s status immediately.
•
When Lethal Arrhy. Alarm is disabled, the medical staff should also pay more
attention to the patient’s status.
12.12 Using with a Patient Monitor
You can connect a telemetry monitor (hereinafter called the telemetry) with the N series
monitor (hereinafter called the monitor) to measure the ECG, Resp, SpO
2
, and NIBP of
ambulatory adult and pediatric patients. The process of connecting the telemetry and the
monitor is called "pairing”.
The pairing should be done mainly on the N series monitor, please refer to the operator’s
manual of the N series monitor.
12.12.1Confirm the Pairing of the Telemetry and the Monitor
When “This telemetry is pairing with patient monitor XX, are you sure?” prompts on
the display of the telemetry during pairing, select Yes to continue.
After pairing with the telemetry, on the monitor, labels of parameters from the telemetry
are followed by “-T”, for example ECG-T, indicating that these parameters come from the
telemetry.
12.12.2 Unpair the Telemetry with the Monitor
To unpair the telemetry and the monitor from the telemetry, follow this procedure:
1. Press the main menu button on the front panel of the telemetry.
2. If prompted, input the password for the screen lock dialog. When Screen Lock is set
to Off , skip this step.
3. Select Unpair .