BeneVision TM80, Руководство оператора

Страница: 150 / 240

12 - 14 BeneVision TM80 Telemetry Monitor Operator’s Manual
•
The symbol displays at the top of the screen while transferring a
configuration.
•
When telemetry monitor is connected to the CentralStation, Import Device
Settings would not work. To use Import Device Settings , telemetry monitor
should not be connected to CentralStation.
■
If an import is successful, the “Download complete.” message will be displayed on the
telemetry monitor B’s screen. The screen returns to the
Defaults menu in 10 seconds.
The “Complete” message will be displayed on the telemetry monitor A’s screen.
■
If the import fails, the “Import attempt failed.” message will be displayed on the
telemetry monitor B’s screen. The “Failure” message will be displayed in the prompt
message list of telemetry monitor A’s screen.
You have two options when a failure occurs:
◆
To stop the import from telemetry monitor A, tap the icon at telemetry
monitor B to exit the Import Device Settings .
◆
To retry the import from the telemetry monitor A, tap the external devices
where the “
Failure ” message is displayed and tap the Retry button to restart
the transfer.
You may need to repeat the retry operation several times until the transfer is
successful.
12.8 Screen Lock Menu
12.8.1 Understanding the Screen Lock Mode
There are two modes of being able to lock the screen to assist in preventing unauthorized
use. Each mode allows the user access to certain features of the product without entering a
passcode. When the correct passcode is entered, all features are available.
■
Locked Mode Features:
◆
Main screen and main menu are not accessible without passcode entry.
◆
The message area is still viewable.
◆
Hardkeys are enabled.
■
View Only Features:
◆
Upon powering up, the main screen will be displayed after the new patient
choice is made.
◆
Main Screen is accessible without passcode entry.
◆
The System Info menu is accessible by tapping the battery symbol on the
main screen.