BeneVision TM80, Руководство оператора

Страница: 47 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 4 - 1
4
User Configurations
4.1 Introduction
This chapter gives you an overview of basic operations related to the telemetry monitor,
such as configuring the Display Setup, and Audio Volume.
4.2 Configuring the Display
You can configure the display by setting the display layout, display orientation, and screen
brightness.
In the main menu, tap Display Setup to enter the Display Setup menu.
4.2.1 Setting the Default Display Orientation
For details about the display orientation, refer to 3.7.1 Understanding the Screen Display
Orientation .
1. In the Setup section of the Display Setup menu, tap Default Orientation .
Two buttons display: Portrait and Landscape .
2. Tap a button to set the default orientation.
The selected orientation displays to the right of Default Orientation .
3. Restart the telemetry monitor to apply the setting.
NOTE
•
The telemetry monitor must be restarted for the default display orientation
selected to be effective.
4.2.2 Understanding Portrait Orientation Display Rules
In portrait orientation, both digital and waveform areas take up the entire width of the
screen. Therefore, these parameters will be displayed in the exact order of the
Display
Setup menu, provided the sensor is attached and monitoring data.
4.2.3 Setting the Portrait Display
1. In the Portrait section of the Display Setup menu, tap Rows .
Three options display: 2 , 3 , and 4 .
2. Tap an option to set the row numbers.
The selected option displays to the right of Rows .