Belarus 1221.2, Руководство оператора

Страница: 210 / 295

BELARUS- 1221.2/1221В.2/1221.3 Aggregation
209
action of their inertial mass! Wait until the tools are completely stopped!
• Prior to leaving the cab of the tractor, lower all the machine elements to the ground,
stop the engine and remove the ignition key!
• It is strictly prohibited to stand in the zone between the tractor and the machine,
unless the transportation mean is secured against accidental rolling down by means of a
parking brake and/or chock and the engine is stopped!
• The folding frame and bucket of the loader shall be secured in the transport posi-
tion!
• Prior to starting the transportation on public roads, the swinging lever of the addi-
tional equipment of the machines, for example, packing wheel shall be turned inwards and
fixed! The markers shall be also fixed in the transport position!
•
The loading platform on the machine aggregated shall be only used for filling the
machine with planting material and fertilizers! It is strictly prohibited to stand on the plat-
form during the work!
• When driving the tractor on slopes and sharp turns, the track should be increased
for improving the stability when there is such a necessity.
• Do not turn the tractor when the working units are sunken. Turn the tractor when all
the working units are raised from the ground. In this case be especially attentive when ag-
gregating the implements with a large grip width.
3.12.4 Mounted and semi-mounted machines
• Prior to aggregating the machines by means of the three-point hitch linkage as well
as prior to disconnecting the machines from the three-point hitch linkage, the control units
of the above mentioned attachment should be set to the position excluding the unintended
lifting or lowering of the aggregate!
• When connecting the machine to the joints of the three-point hitch linkage, ensure
the matching of sizes of the respective connecting members (category or type: t
aggregate)!
• The stay in the zone of the three-point mounted attachment is dangerous due to
probability of serious injuries such as squeezing and cuts! When exercising the remote
control during the mounting of the machine on the three-point mounted attachment, it is
strictly prohibited to stand in the zone between the tractor and the aggregate!
• Ensure the reliable side fixation of the lower rods of the three-point hitch linkage of
the tractor by means of rods, if the aggregate is in the transport position! When driving the
tractor on public roads with the machine in the transport position or lifted aggregate, se-
cure the three-point hitch linkage in the top position to prevent the aggregate from sponta-
neous lowering and ensure the sufficient clearance between the machine members and
road (at least 300 mm)!
3.12.5 Trailed and semi-trailed machines
• Take measures excluding the involuntary rollback and movement of the machines
fitted with the transport wheels!
• When connecting the trailed or semi-trailed machine to the tractor, ensure the
matching of the sizes of the respective coupling members of the tractor and the machines!
• Observe the maximum allowable vertical static load on the traction hitch mecha-
nisms of the tractor!
• When using the single-point hitch of the agricultural machines by means of the
hitching loop (hitch bar or tongue), ensure the necessary mobility at the connection point