Beckman Coulter Avanti J-25, Инструкция по эксплуатации

Страница: 39 / 81

2-11
Description
SYSTEM KEYS
[
START
]
Pressing [
ENTER
], then [
START
] begins the run. ([
START
] must be
pressed within 5 seconds of pressing [
ENTER
].) This key combination
can also be used to abort a deceleration process and restart the
centrifuge.
[
STOP
]
Pressed to end a run according to the deceleration setting. The red
light on the [
STOP
] key flashes while the rotor decelerates. An audible
tone sounds when the rotor comes to a complete stop. Deceleration
can be terminated and the centrifuge restarted by pressing [
ENTER
],
then [
START
].
During a zonal run, pressing [
STOP
] once will decelerate the rotor to
2000 rpm. Pressing [
STOP
] again will decelerate the rotor to 0 rpm.
[
ENTER
]
Pressed to save parameter entries to system memory, and to start
the centrifuge. ([
ENTER
], then [
START
] must be pressed to start the
centrifuge.)