manualshive.com logo in svg

Beckhoff CX1500-B310, Руководство пользователя

Поделиться
Скачать
Beckhoff CX1500-B310 Скачать руководство пользователя страница 112

Product overview

CX1500-M510, CX1500-B510

112

Version: 1.0

Object

Function code

Resulting COB ID (hex)

Resulting COB ID (dec)

PDO5 (tx)

1101

0x681 - 0x6BF

1665 - 1727

PDO5 (rx)

1111

0x781 - 0x7BF

1921- 1983

PDO6 (tx)

111

0x1C1 - 0x1FF

449 - 511

PDO6 (rx)

1001

0x241 - 0x27F

577 - 639

PDO7 (tx)

1011

0x2C1 - 0x2FF

705 - 767

PDO7 (rx)

1101

0x341 - 0x37F

833 - 895

PDO8 (tx)

1111

0x3C1- 0x3FF

961 - 1023

PDO8 (rx)

10001

0x441 - 0x47F

1089 - 1151

PDO9 (tx)

10011

0x4C1 - 0x4FF

1217 - 1279

PDO9 (rx)

10101

0x541 - 0x57F

1345 - 1407

PDO10 (tx)

10111

0x5C1 - 0x5FF

1473 - 1535

PDO10 (rx)

11001

0x641 - 0x67F

1601- 1663

PDO11 (tx)

11011

0x6C1 - 0x6FF

1729 - 1791

PDO11 (rx)

11101

0x741 - 0x77F

1857 - 1919

NOTE

WarningIndex 0x5500 must not be used if Bus Couplers with more than 5 PDOs are present in networks
with node numbers greater than 64, otherwise identifier overlaps can occur.

2.3.9

Objekt directory

2.3.9.1

Object Directory - Structure

All the CANopen objects relevant for the Bus Coupler are entered into the CANopen object directory. The
object directory is divided into three different regions:

1. communication-specific profile region (index 0x1000 – 0x1FFF).

This contains the description of all the parameters specific to communication.

2. manufacturer-specific profile region (index 0x2000 – 0x5FFF).

Contains the description of the manufacturer-specific entries.

3. standardized device profile region (0x6000 – 0x9FFF).

Contains the objects for a device profile according to DS-401.

Every entry in the object directory is identified by a 16 bit index. If an object consists of several components
(e.g. object type array or record), the components are identified by an 8-bit sub-index. The object name
describes the function of an object, while the data type attribute specifies the data type of the entry. The
access attribute specifies whether an entry may only be read, only written, or may be both read and written.

Communication-specific region

All the parameters and objects necessary for the CANopen Bus Coupler’s communication are in this region
of the object directory. The region from 0x1000 to 0x1018 contains various general communication-specific
parameters (e.g. the device name).

The communication parameters (e.g. identifiers) for the receive PDOs are located in the region from 0x1400
to 0x140F (plus sub-index). The mapping parameters of the receive PDOs are in the region from 0x1600 to
0x160F (plus sub-index). The mapping parameters contain the cross-references to the application objects
that are mapped into the PDOs and the data width of the corresponding object (see also the section dealing
with PDO Mapping).

The communication and mapping parameters for the transmit PDOs are located in the regions from 0x1800
to 0x180F and from 0x1A00 to 0x1A0F.

Содержание CX1500-B310























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды