manualshive.com logo in svg

BeaconMedaes Z MED Medical Air System, Инструкции по установке, эксплуатации и обслуживанию

Поделиться
Скачать
BeaconMedaes Z MED Medical Air System Скачать руководство пользователя страница 48

A-14

Z MED Medical Air System

4107 9022 67.00

A.6.2.5   Counters

The “Counters” menu displays the Module (sys-

tem) total run time and the run time for each 

compressor in the module.  (See FIG A.6.2.5 

Counters Menu Flow Diagram)

A.6.2.6  Test

The “Test” menu allows the user to test the 

display and test the operation of the 9 NO/

NC outputs from the Elektronikon. Refer to 

the Electrical Schematic included with the unit 

to identify the operations controlled by each 

output from the Elektronikon. Note: The Ele-

ktronikon must be in “local” mode before you 

can test the controllers’ outputs. To do so, press 

“F3” when at the main screen. The display “Loc.” 

just above the “F3” button will turn off and the 

FIG A.6.2.4 Measured Data Menu Flow Diagram (Continued)

center display will change from “automatic 

operation” to “local operation” (See FIG A.5.1 

ES-6 Status for respective operation symbols). 

Once in local mode navigate to the “Test” menu 

to test outputs (See FIG A.6.2.6 Test menu flow 

diagram). To return the system to “automatic 

operation” press the start button on the left 

side of the controller.

A.6.2.7 Modify Parameters - Parameters

The Parameters section is password protected 

and can only be changed by a certified 

BeaconMedæs

 service technician. Contact 

BeaconMedæs

 Technical Services department 

at 1-888-4MEDGAS (888-463-3427) for assis-

tance.  (See FIG A.6.2.7 Parameters menu flow 

diagram).

Appendix A - Central Control System

Содержание Z MED Medical Air System









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды