baxter Flo-Gard 6301, Руководство по обслуживанию, Страница: 45 / 252

07-19-B1-729 FLO-GARD 6301 DUAL CHANNEL VOLUMETRIC INFUSION PUMP SERVICE MANUAL
6-3
Routine Maintenance Battery Charging
Battery Charging
The battery is recharged whenever the pump is plugged in regardless of
whether the pump is on or off. However, for optimal charging, turn the pump
off. The Plug Icon is illuminated whenever the battery is charging. The
battery must be stored in a charged condition and, if stored for prolonged
periods, should be recharged at least every three months for 48 hours. To
charge the battery, simply plug the pump into a 115 VAC outlet.
Preventive Maintenance
Table 6-2 lists preventive maintenance for the pump, which should be
performed at the intervals shown.
! WARNING !
Whenever the pump is in for service the battery’s capacity should be evaluated
because battery performance degrades through its life.
Table 6-2 Preventive Maintenance Procedures
Check Action
Schedule: As required, but recommended after every use.
Pump mechanism Clean with an agent listed in Table 6-1.
Case Clean with an agent listed in Table 6-1.
Rear Panel Connector (comm port) Clean with an agent listed in Table 6-1.
Replace the connector when its shell is
damaged.
Check that plastic cover is in place.
Loose or missing hardware (for
example, door latch, pole clamp, etc.)
Replace in accordance with Chapter 9,
“Calibration”.
Main Battery Recharge by plugging into a 115 VAC
outlet for at least 16 hours.
Check that the Plug Icon is illuminated
during this time.