Barcrest MPU6, Руководство по обслуживанию на месте

Страница: 93 / 93

93
8.2 MPU6 Real Time Clock set up
To comply with the regulations enforced on the 1
st
of September 2007 it is necessary to have
a real time clock facility. This section details the instructions required to set the real time
clock (RTC).
When the machine is first powered up or has had a program card or PIC change, then it is
necessary to set this up using the function buttons listed below.
•
Select LH2 to step the current selected digit to the left.
•
Select LH3 to step the current selected digit to the right.
•
Select LH4 to Increment the current digit value.
•
Select RH4 to Decrement the current digit value.
•
Select RH2 to set the Time/Date settings and the machine will now reset.
•
Select RH1 to go back to the default Time/Date if required.
When the RTC clock has to be set manually, then enter test 16 using the function buttons
listed above.
Please see section 2.11 for the button deck format.
To comply with the regulations enforced on the 1
st
of September 2007 it is necessary to have
a real time clock facility. This section details the instructions required to set the real time
clock (RTC).
When the machine is first powered up or has had a program card or PIC change, then it is
necessary to set this up using the function buttons listed below.
•
Select LH2 to step the current selected digit to the left.
•
Select LH3 to step the current selected digit to the right.
•
Select LH4 to Increment the current digit value.
•
Select RH4 to Decrement the current digit value.
•
Select RH2 to set the Time/Date settings and the machine will now reset.
•
Select RH1 to go back to the default Time/Date if required.
When the RTC clock has to be set manually, then enter test 16 using the function buttons
listed above.
Please see section 2.11 for the button deck format.