Barco ScreenPRO-II, Руководство пользователя

Страница: 160 / 292

160 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
Key Menu
hÉó=^ÇàìëíãÉåí=jÉåì
From the Key Menu , press
{
SIZE & POS
}
to display the Key Adjustment Menu .
Figure 4-58. Key Adjustment Menu (sample)
The Key Adjustment Menu is virtually identical to the PIP Adjustment Menu — except
that it pertains to Keys rather than PIPs. The following functions are provided:
•
H Size — adjusts the Key’s horizontal size in pixels. The “ % ” value indicates the
key’s size as a percentage of the screen’s horizontal resolution. The numeric
value is the Key’s width in pixels. To adjust, use the
ADJ knob or the Joystick’s Z-
Axis knob.
•
V Size — adjusts the Key’s vertical size in pixels. The “ % ” value indicates the
Key’s size as a percentage of the screen’s vertical resolution. The numeric value
is the Key’s height in pixels. To adjust, use the
ADJ knob or the Joystick’s Z-Axis
knob.
•
H Position — indicates the Key’s position, relative to the horizontal center of the
screen ( 00 ), as measured from the exact center of the Key. Thus, the value -160
is 160 pixels to the left of center. To adjust, use the ADJ knob or move the
Joystick left and right.
•
V Position — indicates the Key’s position, relative to the vertical center of the
screen ( 00 ), as measured from the exact center of the Key. Thus, the value 64 is
64 pixels above center. To adjust, use the ADJ knob or move the Joystick up and
down.
•
Move Rate — adjusts the rate (in 0.1 second increments) for programmed Key
movement, from key frame to key frame. To adjust, use the ADJ knob or twist the
Joystick Z-Axis knob.
•
Key Frame Effect — indicates the “motion type” that is used to move the Key
from point to point.
H Position
V Position
V Size < 58.3% > 448
-160
S
T
A
T
S
N
A
V
KEY ADJUSTMENT
K
E
Y
64
A
D
J
M
A
T
T
E
E
F
X
Move Rate 2.0
Key Frame Effect [ N/A ]
H Size < 33.5% > 606
TRACK SIZE
3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
OPERATION:
JOY Z to SIZE. X Y TO POSITION
Note Only the Linear motion type is supported. All other key frame
effects are ignored by ScreenPRO-II destinations.