Barco ScreenPRO-II, Руководство пользователя

Страница: 189 / 292

ScreenPRO-II Controller • User’s Guide 189
5. System Setup
Return to Factory Default
oÉíìêå=íç=c~Åíçêó=aÉÑ~ìäí
ScreenPRO-II Controller system setup: Step 3 .
In this procedure, you will perform a factory reset — in order to reset all router tables and
source mappings. The procedure guarantees that any previous setups and presets (e.g.,
those that may have been programmed by other users), do not remain in system memory.
S
Prerequisite — Ensure that you are familiar with the System Reset Menu .
In Chapter 4, refer to the “ System Reset Menu ” section on page 111.
„
Use the following steps to return the system to factory default values:
1. On the Home Menu , press SYSTEM to access the System Menu .
2. Press
{
RESET
}
to display the System Reset Menu .
3. On the Device line and select ALL .
4. Scroll to the Reset Type line and select FACTORY .
5. Press
{
RESET
}
. When the confirmation screen appears, press
{
YES
}
to delete all
user configurations and reset the system to factory default values.
qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå
ScreenPRO-II Controller system setup: Step 4 .
In this procedure, you will calibrate the Touch Screen.
S
Prerequisite — Ensure that you are familiar with the LCD Settings Menu . In
Chapter 4, refer to the “ LCD Settings Menu ” section on page 139.
„
Use the following steps to calibrate the Touch Screen:
1. On the Home Menu , press MISC to access the Miscellaneous Menu .
2. Press { LCD SETTINGS } to show the LCD Settings Menu .
3. Press { LCD Cal } to display the first Touch Screen Calibration Menu .
4. Follow the directions on the menu to complete the calibration procedure.
3
4