Barco ScreenPRO-II, Руководство пользователя

Страница: 89 / 292

ScreenPRO-II Controller • User’s Guide 89
4. Menu Orientation
Input Menu
fåéìí=jÉåì=aÉëÅêáéíáçå
The figure below illustrates the Input Menu :
Figure 4-3. Input Menu (sample)
The Input Menu is used to adjust all parameters relating to dedicated and routed inputs,
including the physical sources connected to individual ScreenPRO-II units. The menu
enables you to set all configuration options for the selected input.
To access the menu:
•
Press a blue layer button in the Layer Control Section (the button blinks).
•
Select an input on the Source Selection Bus (the button blinks).
•
Press INPUT on the Home Menu .
The currently selected input appears in the menu’s upper right corner. The menu tracks the
selected input, thus, if you switch inputs on the
Source Selection Bus , the menu is
immediately re-assigned to the new input.
Input Type
Color Space
Sampling Mode
[ RGB ]
[ RGB ]
1:1
H
O
M
E
N
A
V
A
D
J
INPUT MENU SRC_1
C
F
G
S
A
V
E
APPLY
FORMAT
SIZING
COLOR
BALANCE
FORCE
ACQUIRE
Destination
Contrast < % > 100.0
A
R
Format
Input Connector HD-15
1
1024 x 768 @ 60
Layer [ A ]
ID 1
Note The menu cannot be accessed without a selected layer. An
error message will be shown.
Important From a conceptual standpoint, there are no “direct”
connections to a ScreenPRO-II scaler. All connections,
whether they are from a single source or an external router,
connect to the internal router matrix of each ScreenPRO-II.