Barco ScreenPRO-II, Руководство пользователя

Страница: 213 / 292

ScreenPRO-II Controller • User’s Guide 213
5. System Setup
Saving the Setup
p~îáåÖ=íÜÉ=pÉíìé
ScreenPRO-II Controller system setup: Step 19
When all system setup procedures have been complete, press { HOME } to display the
Home Menu , then press
{
SAVE
}
. This action saves the state of the Controller in non-
volatile memory.
Once pressed, the Touch Screen menu reads “ Saving System Configuration .” If you
cycle power, the Controller will return to its state at the time of the “save.”
_~Åâìé=íç=cä~ëÜ=jÉãçêó=`~êÇ
ScreenPRO-II Controller system setup: Step 20
S
Prerequisites — Ensure that you are familiar with the Backup/Restore
Menu . In Chapter 4, refer to the “ Backup/Restore Menu ” section on
page 141.
In this procedure, you will back up your system configuration to a Flash Memory Card .
„
Use the following steps to back up your system:
1. Ensure that you have a (customer supplied) Flash Memory Card available.
2. Insert the Flash Memory Card into the Controller’s rear panel Memory Card slot.
3. From the Home Menu , press MISC to display the Miscellaneous Menu .
4. Press { BACKUP RESTORE } to display the Backup/Restore Menu .
5. On the Device line, select Ctrlr+SP to perform a complete “backup.”
6. On the Controller Options line, select All .
7. Press { CHECK CARD } to check for the presence of a Flash Memory Card.
8. Press { BACKUP } to perform a backup operation to the Flash Memory Card using
the selected device(s) and options.
19
20
Note You can only store one system configuration on a Flash
Memory Card.