Barco ScreenPRO-II, Руководство пользователя

Страница: 90 / 292

90 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
Input Menu
fåéìí=jÉåì=cìåÅíáçåë
The following Input Menu functions are provided:
•
Destination — indicates the destination on which you are currently working (as
selected on the Destination Bus ).
•
ID — indicates the ID of the associated ScreenPRO-II.
~
If “ All ” is shown in a widescreen configuration, menu values represent
those of the lowest numbered ID in the destination. When a parameter is
adjusted, all values for all ScreenPRO-II’s in the destination will snap to
the new value.
~
If an individual ID is shown (e.g., 2 ), it represents that ScreenPRO-II
alone, and adjustments will only affect that unit.
•
Layer — for widescreen destinations, indicates the layer on which you are
adjusting the selected input.
•
Input Connector — selects the physical connector to which the input is
connected on the ScreenPRO-II, either HD-15 or BNC .
•
Format — this line performs two functions:
~
Displays the resolution that is automatically determined by the FORCE
ACQUIRE function.
~
Enables you to set the resolution of the incoming source if desired. Once
the format is selected manually, press
{ APPLY FORMAT }
to accept the
selection.
In Appendix A, refer to the “ ScreenPRO-II Input and Output Resolutions ”
section on page 263 for details on all available resolutions.
Note The ID line only appears when a widescreen destination is
selected.
Important In a widescreen configuration, because the electronics on
individual ScreenPRO-II scalers may not match from unit to
unit, you may be required to adjust ScreenPRO-II scalers and
layers individually — by first selecting a specific destination
ID, followed by a specific layer.
Note The choice of available formats varies depending on the
selected connector. For example, when BNC is selected,
only
Standard Definition and High Definition resolutions
can be selected.
Note Selecting a format manually automatically defaults the
Input
Type
and
Color Space
. In some cases, the
Input Type
and
Color Space
cannot be changed due to the selected
resolution.