Barco Led Pro, Руководство пользователя

Страница: 61 / 186

LED-PRO • User’s Guide 47
4. Operation
Using the Setup Menu
p~íìê~íáçå
From the SDI Source Alignment Menu , select Saturation to adjust the saturation of the
selected input.
•
The adjustment range is -75 to +125.
•
100 is the default setting.
pÜ~êéåÉëë
From the SDI Source Alignment Menu , select Sharpness to adjust the sharpness of the
selected input. This selection sets the scaler's sharpening (or softening) value.
•
The sharpening range extends from -10 (softest) to +10 (sharpest).
•
0 is the default setting (which sets the scaler to its optimum sharpness).
`äáé=íç=pìÄ_äâ
From the SDI Source Alignment Menu , select Clip to SubBlk to eliminate low level noise
in black regions of the image.
•
The adjustment range is 0 to -15.
•
0 is the default setting.
iìã~=qê~ÅâáåÖ
From the SDI Source Alignment Menu , select Luma Tracking to prevent green haze
from appearing in regions of low light.
•
The adjustment range is 0 to -15.
•
0 is the default setting.
bafa=asf
From the SDI Source Alignment Menu , select EDID DVI to display the EDID DVI In
Format Menu , which enables you to update LED-PRO's preferred EDID resolution. Refer
to the “ Programming EDID ” section on page 53 for instructions.