Barco Led Pro, Руководство пользователя

Страница: 75 / 186

LED-PRO • User’s Guide 61
4. Operation
Using the Setup Wizard
12. Select Next to display the Input Type Menu :
Figure 4-40. Input Type Menu (sample)
~
Select PAL if your primary inputs are PAL.
~
Select NTSC/PC if your primary inputs are NTSC or a PC.
This completes the Setup Wizard procedure.
13. Select Next to save the new output configuration. The system displays the Input
Wizard Query .
Figure 4-41. Input Wizard Query
~
Select Yes to launch the Input Wizard . Refer to the “ Using the Input
Wizard ” section on page 62 for details.
~
Select No to exit and display the Status Menu .
Please note the following important points regarding special “automatic” Wizard settings:
•
OLite LED Tiles
If you are using OLite tiles, the Setup Wizard has automatically set the “Creative
Mode” (on the LED Menu ) to Normal .
~
To perform a complete “creative” setup instead, use the Director
Toolset , and then enable the creative mode on the LED Menu .
~
Refer to the “ Creative Mode ” section on page 103 for additional details.
•
SLite and DLite LED Tiles
If you are using SLite and DLite tiles, the Setup Wizard has automatically set the
“Tile Mode” (on the LED Menu ) to Virtual .
~
If you want to enable the “Real” mode instead:
• Select the Tile Mode function on the LED Menu , and select
Real .
• Use the Expert Mode to set up H and V sizes on the output.
~
Refer to the “ Tile Mode ” section on page 103 for additional details.
W h a t i s t h e p r i m a r y
i n p u t s o u r c e t y p e ?
> P A L
N e x t
W o u l d y o u l i k e t o
s e t u p I n p u t ( s ) ?
> Y e s
N o