Barco Led Pro, Руководство пользователя

Страница: 97 / 186

LED-PRO • User’s Guide 83
4. Operation
Using the Expert Mode Menu
içÅâ=íç=pçìêÅÉ
From the LED Output Menu , select Lock to Source to display the Lock To Source Menu ,
which enables you to set “lock to source” parameters:
Figure 4-65. Lock to Source Menu
In order to eliminate video processing delay associated with frame rate conversion, it is
recommended that you lock the LED-PRO to the input source frame rate, using this
function. Following are descriptions of each menu function:
•
Mode — enables or disables the Lock to Source mode.
•
Type — selects the Lock to Source type. The choices depend on the selected
mode. If the mode is disabled, the type is n/a . The available types are:
~
V Lock — vertical lock only. This mode is always available for all input
and output resolutions.
~
HV Lock — both horizontal and vertical lock. This mode is available only
if the input and output V Totals are the same.
•
H Phase — allows the output H timing to be adjusted relative to the Lock to
Source mode. Please note:
~
This selection is n/a when the type is set to V lock .
~
The range is +/- one-half the H Total .
jáåáãìã=aÉä~ó
From the LED Output Menu , select Minimum Delay to display the Minimum Delay
Menu , which enables you to minimize delay through the system if desired.
Figure 4-66. Minimum Delay Menu (sample)
Please note the following important points:
•
Disable the “minimum delay” mode when LED-PRO is performing scaling and
deinterlacing — in order to convert a video format.
L O C K T O S O U R C E
> M o d e
D i s a b l e
T y p e n / a
H P h a s e n / a
Important When Lock to Source is enabled, LED-PRO does not allow
you to switch input channels. You can only switch to/from the
current input channel and the Black/Logo channel.
M I N I M U M D E L A Y
> M o d e
O n
S t a t u s : A c t i v e