Barco Led Pro, Руководство пользователя

Страница: 140 / 186

126 LED-PRO • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
Default Serial Parameters
aÉÑ~ìäí=pÉêá~ä=m~ê~ãÉíÉêë
Default serial communications parameters are provided for the following two ports:
•
Diagnostics Port
•
RS-232 Port
Please note:
•
The system returns to these values after a factory reset.
•
These settings can be changed using the menu system.
~
In Chapter 4, refer to the “ Diagnostic RS232 ” section on page 88 for
instructions on changing Diagnostic Port settings.
~
In Chapter 4, refer to the “ RS232 ” section on page 51 for instructions on
changing the RS-232 port settings.
aá~ÖåçëíáÅë=mçêí
Following are the default serial communications settings for the Diagnostics port, which is
used for diagnostics, software upgrades and serial commands (e.g., via HyperTerminal).
•
Baud Rate = 38.4K baud
•
Parity = NONE
•
Stop Bit = 1
•
Data Bit = 8
•
Echo = ON
•
Flow Control = NONE
opJOPO=mçêí
Following are the default serial communications settings for the RS-232 port, which is used
to communicate with the Director Toolset.
•
Baud Rate = 19.2K baud
•
Parity = NONE
•
Stop Bit = 1
•
Data Bit = 8
•
Echo = ON
•
Flow Control = NONE