![background image](http://html1.mh-extra.com/html/barco/led-pro/led-pro_user-manual_473274118.webp)
104
LED-PRO • User’s Guide
4. Operation
Using the LED Menu
opOPO
From the
LED Menu
, select
RS232
to display the
RS232 Menu
, which enables you to set
the RS-232 baud rate for the
Serial
port — not the
Diagnostic
port. The
Serial
port is
used for communications with the Director Toolset.
Figure 4-86.
RS232 Menu (sample)
•
Select the
Baud
field to set the Serial port’s baud rate.
p~îÉ=`çåÑáÖ
On the
LED Menu
, select
Save Config
to save all current output configuration settings in
non-volatile memory.
oÉëÉí=`çåÑáÖ
On the
LED Menu
, select
Reset Config
to remove all user-entered configuration settings,
and restore the default values for the current output format.
R S 2 3 2
> B a u d
1 9 2 0 0
Note
This function is identical to the
Save Config
function located
in the
Output Setup Menu
(
SETUP > Expert Mode >
Output
). Refer to the “
Save Config
” section on page 84 for
instructions.
Note
This function is identical to the
Reset Config
function located
in the
Output Setup Menu
(
SETUP > Expert Mode >
Output
). Refer to the “
Reset Config
” section on page 84 for
instructions.
Содержание Led Pro
