Barco Led Pro, Руководство пользователя

Страница: 48 / 186

34 LED-PRO • User’s Guide
4. Operation
Quick Function Reference
Enable or disable the LED boost mode Boost Mode 103
Enable or disable the LED creative mode Creative Mode 103
Enable or disable the LED OSD (on screen display) LED OSD 102
Enable or disable the LED tile mode Tile Mode 103
Enable or disable the raster box Raster Box 94
Get information (status) about the current input and output Using the Status Menu 36
Get information on LED wall and fiber communications LED Information 82
Lock or unlock the front panel Lock Front Panel 91
Pan (tilt) image vertically Pan V 96
Pan image horizontally Pan H 96
Program EDID Programming EDID 53
Recall a “global” preset (or "View") Recall 49
Recall a “local” preset from memory Recall Preset 97
Recall an input configuration Recall Config 78
Reset “local” preset settings to default values Reset 97
Reset an input configuration Reset Config 78
Reset output configuration Reset Config 84
Reset to factory default Factory Reset 51
Run the Input Wizard Using the Input Wizard 62
Run the Setup Wizard Using the Setup Wizard 56
Save “local” preset Save Preset 97
Save a “global” preset (or "View") Save 50
Save a custom input format Custom In Format 72
Save all system, input and output settings Save System State 51
Save an input configuration Save Config 107
Save output configuration Save Config 84
Select (configure) a custom input format Custom In Format 72
Select an input signal type Type 72
Select colorspace Colorspace 72
Select sync, de-interlace, pulldown comp and sync slice Processing 77
Set “lock to source” parameters Lock to Source 83
Set Diagnostic Port RS-232 parameters Diagnostic RS232 88
Set Ethernet parameters (mode, DHCP, IP address) Ethernet 89
Table 4-1. LED-PRO Quick Function Reference Table (Continued)
How to: Use the Following: Page