![background image](http://html1.mh-extra.com/html/barco/led-pro/led-pro_user-manual_473274030.webp)
16
LED-PRO • User’s Guide
2. Hardware Orientation
LED-PRO Rear Panel
3) Universal Input 3
Five BNC connectors are provided for
Universal Input 3
— each with a buffered
loop-through. The input corresponds to
Button 3
in the
Inputs Section
, and
accepts RGB, YUV, S-Video (Y/C), or composite (NTSC, PAL or SECAM) signals.
~
In Appendix A, refer to the “
Input Specifications
” section on page 118
for input video details.
4) SDI
Input
One BNC connector is provided for the
SDI Input
. The input corresponds to the
SD/HD SDI
button in the
Inputs Section
, and accepts SD-SDI or HD-SDI signals.
~
In Appendix A, refer to the “
Input Specifications
” section on page 118
for input video details.
5) LED
Interface
One DVI-I connector is provided for the system’s output to an LED wall. The
output is digital only.
~
In Appendix A, refer to the “
Output Specifications
” section on page 119
for output video details.
~
In Appendix A, refer to the “
DVI-I Connector Pinouts
” section on
page 122 for pinout specifications.
6) Ethernet
Port
One RJ-45 connector is provided for 10/100BaseT
Ethernet
communications with
LED-PRO.
~
The port is typically used for diagnostics, or command-line operations via
Telnet.
~
Telnet is via port 10001.
S
telnet 192.168.1.100 10001
In Appendix A, refer to the “
Ethernet Connector
” section on page 123 for
pinouts.
7) RS-232
Port
One 9-pin D connector is provided for RS-232 serial communications with LED-
PRO. The port is typically used for communications with Barco’s
Director
Toolset
Graphical User Interface (GUI).
In Appendix A, refer to the “
Serial and Diagnostic Connector
” section on
page 124 for pinouts.
8) Diagnostics
Port
One 9-pin D connector is provided for RS-232 serial communications with LED-
PRO. Similar to the Ethernet port, this port is typically used for diagnostics,
uploading code or command-line operations via
HyperTerminal
or the
Flash
Loader
.
In Chapter 4, refer to the “
Diagnostic RS232
” section on page 88 for port setup
operations. In Appendix A, refer to the “
Serial and Diagnostic Connector
”
section on page 124 for pinouts.
9) AC
Connector
One
AC Connector
is provided for connecting LED-PRO to your facility’s AC
power source. The integral switch turns the chassis on and off.
Содержание Led Pro
